Ufficiostile Offer composition - 3 bench desks for a total of 6 workstations, with front and side divider screens, cable management vertebrae and monitor arms.
No.03 height-adjustable bench desks.
Top made of 28 mm thick chipboard, melamine-faced with melamine resins. The leg is composed of a pair of central stems connected to each other by a joining crossbar. Each stem is composed of a rectangular-section tubular profile, 70 x 120 mm, made of 2 mm thick steel sheet, inside which two other rectangular-section tubular profiles slide, one inside the other, each 2 mm thick. Under the stem there is a pair of adjustable metal feet coated with polyethylene, allowing a +10 mm adjustment range for levelling.
The top starts from a minimum height of 65 cm and reaches a maximum height of 125 cm.
TOTAL DIMENSIONS
500 x 170 cm
Top height adjustment from 65 cm to 125 cm.
No.05 front and side protective screens.
Made of 18 mm thick chipboard, melamine-faced with anti-reflective melamine resins. A 6 mm thick adhesive expanded polyethylene pad is glued to both sides of the panel. The whole unit is upholstered with a layer of fire-retardant fabric. Several finishes available.
No.06 cable management vertebrae.
Composed of a base in 3.5 mm thick steel sheet. Each element has a section of 65 x 40 mm. At the end there is a terminal element for fixing to the top using self-tapping wood screws.
In the image, it is possible to see 4 cable management vertebrae, 140 cm long, and one 84 cm long.
No.02 monitor arms.
Adjustable with gas spring. Composed of a support connected to an arm that can move vertically and horizontally. At the end of the movable arm there is a plate for supporting LCD/LED/TFT screens. The support is fixed to the desk top by means of a central screw or clamp. It has 3 articulation points and is suitable for 10” to 32” screens with maximum load capacity up to 9 kg. Suitable for screens with VESA holes, model 75 x 75 mm or 100 x 100 mm. The monitor power cable can be placed on the lower part of the arm.
MATERIALS
Main construction materials: 28 mm thick chipboard, density 720 kg/m³, formaldehyde emission class E1, fire reaction “D-s2, d0” / “Class 2”, melamine-faced with anti-reflective melamine resins and edged with 2 mm thick ABS.
CERTIFICATIONS
FSC® Forest Stewardship Council: “The Management of Chain of Custody” for the use of wood from responsibly managed forests.
ECOLOGICAL PANEL: LEB ecological panels are made 100% from post-consumer wood material, obtained from the recycling of wood processing waste.
PRODUCTION
Made in Italy
WARRANTY
3 years
