2-Workstation Bench Desk with Supporting Service Unit

No.01 2-person bench desk.

Bench desk composed of two opposed desks with equipped central rail. Inverted “U”-shaped legs composed of a horizontal crossbar in rectangular-section metal tube, 50 x 40 x 1.5 mm thick, and two vertical uprights in triangular-section metal tube, 65 x 65 x 1.5 mm thick, “Type C” according to EN 527-1:2011. The tops are made of 18 mm thick wood conglomerate coated with melamine in white, “Maroncelli” walnut, light oak, light grey, umber or matt black finish, with 2 mm thick ABS perimeter edges.

The central rail is made of anodised extruded aluminium with rectangular section, 64 x 18 mm, equipped at the ends with special grey ABS caps. Along its entire length, the rail features an internal cavity designed to house nuts for fixing nylon or zama supports, which hold a central planter. Two opening flaps, one on each side, are fixed to the central rail by special zama hinges, allowing access from the worktop and inspection of the cabling.

DIMENSIONS
160 x 158 x 74 h cm

No.02 service units with sliding doors.
Carcass made of 18 mm thick wood conglomerate with melamine coating in white, aluminium or anthracite, with visible 1.5 mm thick ABS perimeter edge. The sliding doors are made of 18 mm thick wood conglomerate with melamine coating in aluminium, bamboo green, poppy red, turquoise blue, mustard yellow or umber, with 1.5 mm thick aluminium-coloured ABS perimeter edge; or in white, light grey, light oak, “Maroncelli” walnut or matt black, with matching 1.5 mm thick ABS perimeter edge.

The doors are attached with special supports to the aluminium rails applied inside the unit: No. 2 under the top panel and No. 2 above the bottom. Push-button lock supplied with double folding key and grey ABS grip. No. 5 black ABS levelling feet.

DIMENSIONS
160 x 48 x 58 h cm

OVERALL DIMENSIONS
320 x 170 x 74 h cm

MATERIALS
Main construction materials: 18 mm thick wood conglomerate coated with melamine.

CERTIFICATIONS
Certificate of Compliance with Italian Legislative Decree No. 81 of 09-04-2008: evaluated according to the results obtained in tests under standards EN 527-1, EN 527-2, EN 1730/12, EN 1730/13, EN 13722/04, EN 13721/04.
UNI EN 527: all desks comply with technical standards.
UNI 9086: resistance of the structure to impacts against legs or supporting side panels.
UNI 1730: test methods for determining stability, strength and durability.
FSC® Forest Stewardship Council: “The Management of Chain of Custody” for the use of wood from responsibly managed forests.
GREENGUARD®: the product meets strict standards for chemical emissions.

PRODUCTION
Made in Italy

WARRANTY
3 years